The Centri-Sifter® centrifugal sifter features a hinged end
cover and three-bearing shaft that cantilevers for quick removal
of internal components.
External roller bearings are located at the motor end of the
shaft and on a hinged cover at the discharge end for maximum support
and vibration-free operation. When the end cover is hinged open,
the shaft becomes a cantilever supported by a third externally
mounted roller bearing located between the motor-end bearing and
material feed point, allowing internal components to slide freely
from the opposite shaft end.
The sifter is ideal for food, dairy and pharmaceutical applications
requiring thorough wash-down, as well as general chemical applications
involving frequent screen changes/inspections or runs of multiple
materials with no cross contamination.
Dry or moist bulk solid material is gravity-fed into the feed
inlet and redirected into the cylindrical sifting chamber by means
of a feed screw. In addition to sifting, scalping and dedusting
of dry bulk materials, the screener can break up soft agglomerates
and/or dewater moist solids or slurries.
Hinged end cover provides access to the cantilevered
shaft end, allowing rapid removal of the cylindrical screen
and helical paddle assembly for thorough wash down.
click to enlarge
